KMBJ Structural Steel, Inc.

Structural Steel, Ornamental Iron Works and Welding Services in Los Angeles

Columns and Beams Fabrication and Erection

The Steel Columns and Beams are architectural and Structural engineering elements of the buildings. The column is an element that transmit trough compression, the weight of the structure above to another structural element below. The beam is a lineal element usually horizontal, and carry vertical loads in its axis to transmit the support points.

According the designer that specify in the plans, some parts, elements and works are fabricated in the shop, to finally be erected in the field or the client place. The columns and beams are designed and fabricated usually with HSS (Hollow Structural Section) or wide flanges. The fabrication and erection of steel columns and beams are demanded mainly by general contractors, land or building owners and tenants; to improve o remodel the buildings.

For information or estimates of Columns and Beams Fabrication and Erection Service, please call; (323) 637-8916, Or Email;
Our address is: 12929 Telegraph Rd Unit I, Santa Fe Springs, CA 90670

The Cities where we can Build and Install Steel Structures are: Newport Beach, Huntington Beach, Seal Beach, Manhattan Beach, Santa Monica, Malibu, Santa Barbara, San Jose, Orange County, Riverside, Irvine, San Bernardino, Costa Mesa, Ventura, Ontario, Dana Point, Redlands, Fontana, Chino, Cerritos and Surrounding Areas.

Columns and Beams Fabrication and Erection Los Angeles, United States.

Columns and beams

Reinforcement of Girders, Joists and Trusses

The Steel Girder and the Joist are both types of Beams. A Beam is a general term, that refers to a structural member in a structure, that support a roof, floor or other load above, which is supported by a column or columns. Joist is a Structural member supported by Girders or other Beams.

The steel Girders and Joists are designed by Structural Engineers, and architects for industrial and commercial buildings principally. Sometimes they need to be reinforced to increase their strength to accommodate added loads for which they were not originally designed, also due to maintenance against the deterioration or damages of the structures.

The KMBJ Structural Steel company attends for Erect, Install or Reinforce the Girders and Joist in the counties of Los Angeles, Orange, Ventura, San Bernardino, Riverside and San Diego in Southern California State.

Girder and joist reinforcement Los Angeles, United States.

Girder and joist reinforcement

Steel Strong Backs

A Strong Back is a Steel Frame which acts as Secondary Support member in an existing Structure. Is usually designed and placed as frame in a new opening through an existing wall as a new; door, window, or to remove all or part of the wall.

The Strong Backs are required by the general contractors, owners of warehouses, and home owners that needs modify their properties. For this reason, it is only necessary to determine their location and their complements as door, windows, and other frames, to be designed; and finally placed or installed.

The company mainly serves and install the Steel Strong Backs in Los Angeles in Southern California and Surrounding Areas.

Roof Acces Ladder

It is a type of Metal Ladder, designed and made to have access to a floor, ceiling, or roof in tall Buildings, For allows access with little space or difficult access. Therefore, they usually have a circular guard cage protection based on the Standard Codes.

After the fabrication; we deliver or transport and assemble in its final location, in our area served; Los Angeles and Southern California. For: general contractors, and home owners.

Contact to KMBJ:

  • Address: 12929 Telegraph Rd Unit I, Santa Fe Springs, CA 90670
  • Phone: (323) 637-8916
  • Emails:,
  • California Contractor’s License: #1044441

  • C-51 Structural Steel Contractor
  • C-23 Ornamental Metal Contractor
  • LA City Steel Fabricator License:

  • #FB03342